叶绿素敏化二氧化钛纳米管电极光电性能及其增强机理

为了研究叶绿素的敏化机理,本文以菠菜叶片叶绿素的乙醇浸提液敏化纳米管TiO_2电极,在Na2SO4水溶液电解液中测定其光电性能。敏化电极的光电流响应曲线显示,叶绿素浸提液敏化纳米管TiO_2电极时会显著改变电极的光电流值,而敏化Ti电极时则产生光电流极小。电极的循环伏安曲线则表明,叶绿素浸提液使电极上的氧化反应更容易发生。测定不同浓度的叶绿素浸提液敏化纳米管TiO_2电极的单色光光电转化效率(IPCE)图谱,结果表明,合适的叶绿素浓度(7.123~71.23μg/L)使电极IPCE平均增加2倍以上,但浓度增大至7123μg/L时,其敏化电极IPCE则明显降低;同时发现叶绿素的敏化作用未明显改变TiO_2电极IPCE图谱的特征谱峰位置。根据实验数据和结果,得出在水溶液中叶绿素改变纳米管TiO_2光电性能的机理,主要是通过叶绿素分子与TiO_2电极中的光生空穴发生反应,进而减少光生电子与空穴的复合,使电极有效光生电子数量增加,光电流密度增大,最终提高TiO_2电极的IPCE。     

基于共轭聚合物的近红外光传感器

近红外光(NIR)传感器在军事警戒、空间勘探、科研检测、医疗诊断等领域有着极为重要的应用价值。传统的NIR传感材料主要是基于半金属的无机材料,借助窄带隙来吸收低能量的NIR而改变材料自身的电导率,继而实现检测。无机传感材料由于加工繁琐、不具备柔性、成本高昂以及难降解等因素致其进一步发展受到限制。新兴的共轭聚合物材料通过光热转换或者能级可调的光电效应实现对NIR的高灵敏传感,同时能够实现快速响应。该类聚合物材料具有π电子离域的共轭结构,同样具有较窄的带隙,在NIR照射下能够通过自身电导率的改变或光热转换作用将热量传递至其他超热敏材料来实现对光的检测。借助柔性、环境友好、制备简单、便于掺杂、灵敏度高等优势,共轭聚合物材料为新一代NIR传感器的应用与普及开辟了新的前景。     

四氯化碳液相催化加氢制氯仿多元金属催化剂的制备及其催化性能

以贵金属M(=Pd,Pt)为主要活性成分,掺加过渡金属Fe和Ni作为助剂,采取浸渍和氢气还原法制备了椰壳活性炭(ACcs)负载的单元金属(M/ACcs)、二元金属(M-Ni/ACcs、M-Fe/ACcs)和三元金属(M-Ni-Fe/ACcs)系列催化剂;通过CC_l4液相催化加氢制氯仿反应考察了这些催化剂的催化活性和选择性。结果表明,Pd基催化剂的催化活性明显高于Pt基催化剂,但后者对氯仿的选择性优于前者;在前5 h加氢反应时段,两系列催化剂的活性顺序为:Pd-Ni-Fe/ACcsPd-Fe/ACcsPd/ACcsPd-Ni/ACcs和Pt/ACcs≈Pt-Fe/ACcsPt-Ni/ACcsPt-Ni-Fe/ACcs;总体上,引入Fe对于催化性能的改善效果要优于Ni,Ni的单独引入则会不同程度地降低催化活性。综合考量成本、活性和选择性等因素,优选Pd-Ni-Fe/ACcs作为催化剂,在393 K下反应5 h,可实现CC_l497.6%的转化率以及接近100%氯仿的选择性。     

深入研究模糊逻辑的必要性与紧迫性

因为"取大取小"不是数学计算,所以基于"取大取小"的模糊逻辑不能为数值转换提供算法支撑,使得模糊理论面临无合适模型可用的被动境地.指出,模糊逻辑是逻辑的一个新的近似推理研究方向,它的量化方法是数值计算;目的是支撑隶属度转换,使得由指标隶属度确定的目标隶属度是"真值"在当前条件下的最优近似.模糊逻辑是在隶属度转换条件下对人类近似推理本领规范的一种方法.而进行规范的依据是区分权滤波的冗余理论,实质性计算是由冗余理论导出的、实现隶属度转换的非线性去冗算法;相应的隶属度转换模型是非线性数学模型.     

An efficient and selective conversion of sorbitol in ionic liquids: Use of ion exchange resin as a solid acid catalyst

Sorbitol was readily converted by heating in hydrophobic ionic liquids by the presence of ion exchange resins. Chemoseletivity of the dehydration depended on the choice of ion exchange resin; Nafion selectively produced isosorbide while Amberlite gave 1,5-anhydrosorbitol along with unreacted sorbitol. Ionic liquids used in the reaction were readily recovered by simple extraction procedure. With these procedures, we succeeded to prepare isosorbide in pure form, not contaminated with either ionic liquids or acid catalyst, by simple experimental procedure.     

Rapid separation and simultaneous quantitative determination of 13 constituents in Psoraleae Fructus by a single marker using high‐performance liquid chromatography with diode array detection

Psoraleae Fructus is one of the most popular traditional Chinese medicines. Coumarins, flavonoids, and meroterpenes are the main contributors to the biological activity of Psoraleae Fructus. In this study, a new method for the quality control of Psoraleae Fructus was developed, through the quantitative analysis of multicomponents by single marker with diode array detector. Thirteen components, including psoralenoside, isopsoralenoside, psoralen, isopsoralen, psoralidin, neobavaisoflavone, bavachin, corylin, isobavachalcone, corylifol A, bavachinin, bavachalcone, and bakuchiol were rapidly separated and identified within 12 min by the newly developed method. The feasibility and reliability of this method were corroborated. The method was also compared to the external standard method and detection by corona charged aerosol detector. The results of percent difference (%) and cos (θ) have shown that there were no significant differences observed between the quantitative analysis of multicomponents by single marker and external standard method analyses; psoralen and isopsoralen were undetectable with the corona charged aerosol detector due to their but the sensitivity for all the compounds except bakuchiol detected by corona charged aerosol detector are higher than those obtained by diode array detector. In addition, the newly method developed was applied to the quality evaluation of Chinese patent medicines containing Psoraleae Fructus.     

Nanostructured Materials for Heterogeneous Electrocatalytic CO2 Reduction and their Related Reaction Mechanisms

The gradually increased concentration of carbon dioxide (CO₂) in the atmosphere has been recognized as the primary culprit for the rise of the global mean temperature. In recent years, development of routes for highly efficient conversion of CO₂ has received much attention. This Review describes recent progress on the design and synthesis of solid‐state catalysts for the electrochemical reduction of CO₂. The significance of this catalytic conversion is presented, followed by the general parameters for CO₂ electroreduction and a summary of the reaction apparatus. We also discuss various types of solid catalysts based on their CO₂ conversion mechanisms. We summarize the crucial factors (particle size, surface structure, composition, etc.) determining the performance for electroreduction.     

Understanding the Effect of Solvent Environment on the Interaction of Hydronium Ion with Biomass Derived Species: A Molecular Dynamics and Metadynamics Investigation

The addition of aprotic solvents results in higher reactivities and selectivities in many key aqueous phase biomass reactions, including the acid-catalyzed conversion of fructose to 5-hydroxyl methyl furfural (HMF). The addition of certain co-solvents inhibits the formation of humins via preferential solvation of key functional groups and can alter reaction kinetics. An important factor in this context is the relative stability of the hydronium ion (the catalyst) in the vicinity of the biomass moiety as compared to that in bulk, as it could determine its efficacy in the protonation step. Hence, in the present work, molecular dynamics (MD) simulations of HMF (the model product) and fructose (the model reactant) in acidic water and water-DMSO mixtures are performed to analyze their interaction with the hydronium ions. We show that the presence of DMSO favors the interaction of the hydronium ion with fructose, whereas it has a detrimental effect on the interaction of hydronium ion with HMF. Well-tempered metadynamics (WT-MTD) simulations are performed to determine the relative stability of the hydronium ion in the immediate vicinity of fructose and HMF, as compared to that in the bulk solvent phase, as a function of solvent composition. We find that DMSO improves the stabilization of the hydronium ions in the first solvation shell of fructose compared to that in the bulk solvent. On the other hand, hydronium ions become less stable in the immediate vicinity of HMF, as the concentration of DMSO increases.     

Redox targeting of energy materials

The redox-mediated electrochemical–chemical process, when it involves the redox-targeting reaction with energy materials, has shown intriguing potential for various energy-related applications. This review starts with a brief discussion on the evolution of redox-targeting reactions for high-energy redox-flow batteries and the critical future studies for large-scale energy storage. Then, with spatially decoupled water electrolysis as an example, the merits of redox-targeting reaction by liberating the catalyst from electrode surface are highlighted, followed by an introduction of redox targeting–based thermal-to-electrical conversion. We have also featured various redox-targeting processes in other fields of study, such as electrochromic window, redox catalysis, and spent battery material recycling. Overall, this review attempts to demonstrate the incredible versatility and prospects of redox-targeting process for energy-related applications.     

中空多壳层结构在电磁波领域中的应用

中空多壳层结构(HoMSs)是一种以纳米颗粒为结构单元构筑而成的具有多界面、 多维度的微纳米级宏观组装体, 具有次序排列的多个壳层及相互连通的多个空腔, 被认为是电磁波领域极具应用前景的功能材料. 本文主要从电磁波捕获、 传输及能量转换3个角度详细阐述HoMSs在电磁波领域应用中的独特优势, 浅析了HoMSs壳层数目、 壳层厚度、 壳层间距、 壳层组成等结构参数对电磁波传输与利用的影响规律, 并预测了HoMSs在电磁波领域的发展趋势, 以期为实现电磁波的高效利用提供参考.